3D Print Sonic the Hedgehog how to finish with Putty and Paint.
This is the 2nd type I have done this as I am still learning.
=== Chapters ===
0:00 Intro
1:00 – Filler Paint
2:42 – Putty
4:18 – Blue Spray Paint
7:08 – Showing how I taped before I Airbrush
8:00 – Airbrush Painting
8:45 – Final
=== Product Links ===
Global Solution Technology 3d – Filament $10 or $12 depends on the deal they are having.
https://gst3d.com/
Sonic the Hedgehog!
https://www.thingiverse.com/thing:2178466
Rust-Oleum 260510 Automotive 2-in-1 Filler & Sandable Primer, 12 oz, Gray
https://amzn.to/3fhdtkZ
Rust-Oleum Clear 302151 Universal All Surface Spray Paint 11 oz, Dead Flat
https://amzn.to/3bSkMNJ
Bondo Glazing and Spot Putty, Fills Pinholes, Scratches, Minor Dings & Hairline Cracks, 16 oz, 1 Tube
https://amzn.to/3ufQFX6
Amazon Basics Painters Tape, 1.88″ x 180′, 6 Rolls
https://amzn.to/3oKc21D
Build 20×20 Spray Booth
https://youtu.be/LxHQ-RQD9vc
Master Airbrush Cool Runner II Dual Fan Air Compressor Professional Airbrushing System Kit with 3 Airbrushes, Gravity and Siphon Feed
https://amzn.to/2UND7pH